Snap-In License Plate, Utility or Dash Light # LP11CB, when used as a license plate light, fits into a 1-1/4 inch hole in a bumper; usually found on trucks with step bumpers. There isn't a license plate frame that has a 1-1/4 inch hole. The hole would have to be put into the frame if used on a trailer.
Another option is to use a license plate frame with a built in light such as # LP55CB or # LPL55CB. view full answer...
The WeatherTech Plate Frame # WT61020 would show the registration stickers of your Ohio license plates. It would not cover a significant amount of your plate at all. view full answer...
There is a Cruiser Accessories Motorcycle License Plate Frame available that is fairly similar to the Nouveau plate frame you mentioned. Take a look at the Cruiser Accessories Neo, part # CR77050. You can see the frame by using the provided link. view full answer...
I have an option for you but the Cruiser license plate holders that you looked at like part # CR21010 are not made in the USA. However, the WeatherTech brand of license plate holders are made in the USA.
I recommend the WeatherTech ClearFrame Chrome License-Plate Frame part # WT63023 but I did attach a link of all of the WeatherTech license plate frames available. view full answer...
I have a solution for you. While we do not carry a license plate that fits exactly with your 7 inch x 4 inch dimensions, we do carry the Neo Motorcycle License Plate Frame - Black # CR77050. The license plate frame has inner dimensions of 6-5/8 inches wide x 3-5/8 inches tall. While this plate frame will definitely cut off some of your plate, it hopefully will not cut off the lettering. If you need the hardware for fastening the cover, I recommend the Star Pin Locking Fasteners for License... view full answer...
I went into our warehouse and grabbed a Cruiser License Plate Frame # CR15350 you referenced to check if this item comes with the tabs on the back. It does, in fact, feature a tab on either side near the bottom to help prevent the license plate from rattling while you travel.
Another product you may be interested in is the Cruiser Locking Star Pin Fasteners # CR81200. These fasteners deter the theft of your license plate and plate frame with a star-shaped keyhole and special key that is... view full answer...
The motorcycle license plate frame part # CR77000 that you referenced is designed to fit the standard motorcycle license plate frame size of 4 inch by 7 inch. view full answer...
The Cruiser Accessories License Plate Mounting Plate # CR79150 has the exact same dimensions as a license plate so it would not be visible behind one. It would just appear as if the license plate was 1/4 of an inch off the back of the surface it is mounted to. view full answer...
I have some license plate frames that you may be interested in, but we do not have anything like what you described.
I have attached a link to all of the religious license plate frames that we offer. view full answer...
You could use a license plate holder like part # CE26053A as it has adjustable mounting slots to accommodate the smaller license plate you have.
But as far as a frame that goes totally around the plate that is not available. view full answer...
According to Cruiser Accessories, their # CR76200 Tuf Flat license plate shield is designed to work with a license plate frame, so it'll work just fine with your existing frame.
If you don't already have mounting screws, you can use the # CR81300 set which includes security bolts that are very difficult to remove unless the included wrench is used. view full answer...
We offer several black license plate frames including the Neo Classic from Cruiser, part # CR15350, which is made of durable die-cast zinc with a black powder-coated finish. We also offer their Classic Lite License Plate Frame # CR20050, also made of zinc, that is designed to show more of your plate. Another option is their # CR15050. view full answer...
The Cruiser Tuf Flat Clear Shield for License Plates # CR76100 is designed to work well with or without license plate frames. Since it is flat and contours to the plate's surface it will work with most frames but in some cases you might need longer hardware for it to work with a particular frame.
I went to our warehouse to look at this item for myself. It measures 12 x 6-inches overall. There is a small lip on the shield that gives it a total thickness of about 1/8-inch. view full answer...
Yes, the Elite Stainless License Plate Frame part # CR21010 will absolutely fit both the front and rear license plates on your new 2018 Acura ILX. The U.S.A. uses a standard license plate size (12" long x 6" wide) so there will be no need to measure first. view full answer...
The backup sensors and camera on the Hopkins Rear View Camera # HM60195VA will prevent most aftermarket license plate frames from being able to be used. The plate will sit behind the notches in the camera and backup sensor mounts. view full answer...
Yes, the Golf Club License Plate Frame # CR19509 that you referenced will fit the standard license plate area that is on your husband's 2015 Chevy Colorado. view full answer...
Actually when you install the Barbed Wire License Plate frame part # CR22230 you basically just install it over the license plate. This isn't the type of frame that requires you to manipulate the plate into the frame.
To see how it will install check out the install video I attached that shows a similar plate frame being installed. view full answer...
No, as long as the WeatherTech ClearFrame License-Plate Frame - Black # WT63020 is free from dirt/dust and is clearly visible, you will be safe from tickets. I currently have a tinted license plate cover on my vehicle, and I've never received any attention from traffic enforcement. However, in order to confirm this, I recommend consulting with your local law enforcement division. view full answer...
Yes, if you only have two top bolt holes available on your 2007 Toyota Tundra for your front license plate, having a frame around your plate such as the Elite Stainless License Plate Frame, # CR21010 along with Anti-Rattle Fasteners, # CR81400 for the bottom will improve the situation. view full answer...
The Neo Classic license plate frame # CR15350 is made of durable, die-cast zinc with black powder coated finish so it is metal. It is legal for all 50 states since it does not cover up very much of the plate. view full answer...
Go To Results